iPhone/iOS Gateway

R349,00

Our recommended option. Bluetooth TPMS Internal Tyre Pressure Monitoring System. Set custom alarms. Can monitor trailer and spare wheels as well. Indicates tyre temperature. The TPMS also monitors failures like air leaks or tyre bursts. You can add as many tyres as needed. Perfect for when you have a trailer or caravan and multiple spares wheels.

The nGuage 4×4 TPMS sensors come in kits of 1, 2 and 4. As an example, if you have 4 wheels on the car plus 1 spare, and you have a trailer with 2 wheels and 1 spare, then you can use two kits of 4 to get the 8 total sensors you need. Or a common option is 6 TPMS sensors for car and trailer. Use the drop down menu to choose the kit of your choice.

Features:

  • Wireless
  • Internal installation – replaces the standard car valve.
  • Monitors tyre pressure, temperature and leaks.
  • Real time monitoring
  • Warning alarm for Air Leak, High/Low Temperature, High/Low Pressure, Low Battery

Sensor Specifications

  • IP67
  • Working Humidity: 95% MAX
  • Tire Pressure Detection Range: 0-1300kPa (0-13bar)
  • Tire Pressure Detection Accuracy: ± 10kPa
  • Tire Temperature Detection Accuracy: ± 3℃
  • Working Temperature: -40℃ ~ +85℃
  • Battery Capacity: 330mAh (Not replaceable – sealed unit)
  • Battery Life: 3~5 Years (based on 5-3 hours of daily driving)
  • Sensor Weight: 33g±1g
  • Fits 11.5mm rim hole.
  • Not to be used with tyre sealant
  • Installation and care instructions view the manual
  • Warranty voided if care and installation instructions are not followed.

Like all TPMS units, the sensors go into battery saving mode when stationary or during periods where there are minimal pressure differences.

 

iOS / iPhone users, please note, should you wish to use the nGauge 4×4 App while it is minimized (running in background), our Gateway is required. 

SKU: CAWEGTWAY Categories: , ,

Description

Our Gateway is compulsory for iOS / iPhone when:

1. You plan on using the nGauge 4×4 App while it is minimized (running in background).

2. Have a Battery Voltage Sensor or Gas Liquid Level Sensor or plan on buying one.

If you plan on always using the nGauge 4×4 App while it is open (in foreground), and dont have a Battery Voltage Sensor or Gas Liquid Level Sensor, then you dont need the Gateway.

The Gateway can be plugged into a standard USB connector from Car radio or Cellphone charger to power it. The nGauge 4×4 App supports multiple Gateways if you move around between more than one vehicle.

Please note that enabling the mute switch on the side of you iphone will prevent all audible alarms from the app. Notifications will be shown but will be silent.

Why does iOS need the Gateway for the nGauge 4×4 App to function while running in the background?

When you minimize or run the nGauge 4×4 App in background mode, iOS blocks the Bluetooth messages from reaching the nGauge 4×4 App, because the App is not “paired” to each individual sensor. To overcome this, we developed the Gateway specially for Apple/iOS. The nGauge 4×4 App will remain connected or paired to the Gateway irrespective if the App is running in foreground or background. The Gateway then acts as a relay and transmits all the Bluetooth messages from the sensors to our App and you are instantly notified by an alarm when an issue occurs.

No manual pairing or set up is required from the user side. Our App will detect the Gateway as soon as it is in range and automatically connect to it to receive the information from your sensors. Please note only one Phone can connect to the Gateway at a time.

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.